Mobil - ulja za industrijske reduktore
Ulja za industrijske reduktore (zupčaste prenosnike) koja se odlikuju ekstra visokim performansama i izvanrednim svojstvima zahvaljujući kojima mogu da podnesu ekstremne pritiske i veliko opterećenje. Namijenjeno podmazivanju svih tipova zatvorenih reduktora sa cirkulacionim sistemom podmazivanja, ili sistemom podmazivanja zapljuskivanjem.
- Product Data Sheets (PDS)
- Sigurnosni list (MSDS)
| Typical Properties | |||||||
| Mobilgear 600 XP Series | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| ISO Viscosity Grade | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| Viscosity, ASTM D 445 | |||||||
| mm2/s @ 40oC | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| mm2/s @ 100oC | 8.8 | 11.2 | 14.7 | 19 | 24.1 | 30.6 | 39.2 |
| Viscosity Index, ASTM D 2270 | 101 | 97 | 97 | 97 | 97 | 96 | 90 |
| Pour Point, oC, ASTM D 97 | -27 | -24 | -24 | -24 | -24 | -15 | -9 |
| Flash Point, oC, ASTM D 92 | 230 | 230 | 230 | 240 | 240 | 240 | 285 |
| Density @15.6 oC, ASTM D 4052, kg/l | 0.88 | 0.88 | 0.89 | 0.89 | 0.9 | 0.9 | 0.91 |
| FZG Micropitting, FVA 54, Fail Stage / Rating | 10 / High | 10 / High | 10 / High | 10 / High | 10 / High | 10 / High | |
| FE 8 wear test, DIN 51819-3, D7,5/80-80. Roller wear, mg | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Timken OK Load, ASTM D 2782, lb | 65 | 65 | 65 | 65 | 65 | 65 | 65 |
| 4-Ball EP test, ASTM D 2783, | |||||||
| Weld Load, kg | 200 | 200 | 250 | 250 | 250 | 250 | 250 |
| Load Wear Index, kgf | 47 | 47 | 47 | 48 | 48 | 48 | 48 |
| FZG Scuffing, Fail Stage | |||||||
| A/8.3/90 | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ |
| A/16.6/90 | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ | |
| Rust protection, ASTM D 665, Sea Water | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100oC | 1B | 1B | 1B | 1B | 1B | 1B | 1B |
| Demulsibility, ASTM D 1401, Time to 3ml emulsion, minutes @ 82oC | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| Foam Test, ASTM D 892,Tendency/Stability, ml/ml Sequence 1 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 |
| Sequence 2 | 30/0 | 30/0 | 30/0 | 30/0 | 30/0 | 30/0 | 30/0 |
| Mobilgear 600 XP meets or exceeds the requirements of: | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| AGMA 9005-E02 | 2EP | 3EP | 4EP | 5EP | 6EP | 7EP | - |
| DIN 51517-3: 2009-06 | X | X | X | X | X | X | X |
| ISO 12925-1 Typ | CKD68 | CKD100 | CKD150 | CKD220 | CKD320 | CKD460 | CKD680 |
| Mobilgear 600 XP has the following builder approvals: | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| Siemens T 7300, Table A-1, Revision 13, FLENDER Code No.: | - | A17 | A16 | A15 | A14 | A13 | A12 |
| Mueller Weingarten DT 55 005 | CLP100 | CLP150 | CLP220 | CLP320 | CLP460 | ||
